Analysis of the purchase and installation process of induction urinal

In order to facilitate use, almost all public toilets have stainless steel urinals in the men's toilets. However, pay attention not only to the quality of the product, but also to the size and settings.

Nowadays, things are getting smarter and smarter. We have great convenience in our clothing, food, housing and transportation. The emergence of induction urinals can be said to save us time in going to the toilet. While experiencing smart life, what should we pay attention to in terms of purchase and installation?

Knowing the convenience of smart life, families with conditions will now install an inductive urinal to facilitate the elderly and children. How to choose a smart urinal?Mainly pay attention to these points：

1. On-site water test: When purchasing, test the water directly on-site to see how fast and clean it is.

2. Sewage discharge capacity: A good smart urinal can discharge sewage, the scouring area is relatively large, the noise is very small, the surface is relatively smooth, and the water absorption rate is very low.

3. Smart experience: Smart sensor urinals generally have infrared sensor technology, so you must try the sensitivity and sprinkle water directly. If the person leaves for more than 10 seconds and stops, then it proves that this is a good product.

4. Specification purchase: You can design according to your own needs, and show the design drawings and plans to the product merchant, and ask him to recommend a suitable urinal.

5. Whether it is easy to clean: Before buying, carefully observe the surface and see if it is flooded under the light. After rinsing, the surface should be smooth, shiny and crystal clear, with no obvious needle eyes, no cracking or deformation.

Induction urinal installation process and precautions

Step 1. Before installing the induction urinal, the installation of water pipes and drainage pipes must be carried out in accordance with the specified design size, so that foreign body clogging can be prevented in advance.

Step 2. In the position of the hanger for fixing the water pipe, it must be done according to the design, and the corresponding depth must be drilled for better installation. Remember not to use a large drill bit to avoid loosening at that time. If the time is a little longer, it will be loose.

Step 3. Remove the water and dust around the newly installed sensor urinal, put a water hole rubber ring on the outlet, hang the urinal on the rack, lock the screws, and fix the urinal to the wall.

Step 4. Install a copper water supply device.

Step 5. Turn on the water and perform a water test operation. If you find that the water pipe is leaking, it is generally a problem with the installation of the rubber ring to the water hole, and the urinal needs to be removed and reinstalled.

Step 6. It is also necessary to see if there is any leakage in the urinal. If so, glass glue must be used to fill the leakage gap to ensure more stable subsequent use.

The above is the analysis of intelligent urinals. Our research on urinals has been refined and specialized to satisfy you.